How to clean dryer vent?

 To maintain a perfectly efficient dryer, it is advisable to never neglect the maintenance of filters and condensers  (present in models equipped with a heat pump). During the drying phase of the garments, the appliance emits hot air on the fabrics. If not perfectly clean, the filters could yield fluff and dusty residues to the fibers. To avoid this, it is necessary to carry out regular cleaning of the individual parts.

The filter, generally positioned in the lower part of the appliance frame, can be extractable towards the outside or fixed to the housing by means of a system of springs to be pressed. The filter traps lint normally produced by clothing. Other residues can reach the second filter or the condenser. To avoid malfunctions, it is advisable to periodically remove the filter elements and clean them with a simple dry cloth or with a vacuum cleaner.

After removing the surface dirt, you can wash them under running water or immerse them in a basin of hot water with a few drops of neutral soap or dish soap. Subsequently, with a toothbrush, they scrub the sides of the filters very carefully to remove the most stubborn impurities. In the end, they must be rinsed with cold water and dried with a clean cloth, preferably in microfibre so as not to leave lint.

When to clean the dryer vent?

Filter maintenance should generally be carried out every 5 or 6 programs in order to improve the performance of the dryer and reduce energy consumption. The second filter of the dryer precedes and protects the lamellar condenser. It is located at the base of the appliance, closed inside a panel, and removable by means of a handle that allows it to be easily removed or some latches that anchor it to the housing.

Relevant Section and Read this Article

Once extracted, the filter must be carefully cleaned of all dirt residues. You can also proceed in this case with a vacuum cleaner, a brush with soft bristles or with your hands. The filter is then passed under cold running water and air-dried before reassembly. The water tank also deserves special attention. It is usually located at the top right of the dryer or near the door.

The contents of the tray must be removed when the indicator indicates full, at each cycle, or according to the degree of humidity of the garments. To reduce cleaning operations, it is possible to opt for a direct connection to the drain, even if it is not very pleasing to the eye. The best manufacturers of the appliance recommend removing the contents of the tray every 5 cycles.

In addition, once every 6 months it is advisable to clean the tank with a solution consisting of half water and half white vinegar. In this way, it will be possible to eliminate in a short time the limescale that inevitably settles in the tray. The recovered water can be used for various interesting purposes.

In fact, being demineralized, it is useful for the iron tank, to fill the car windshield wiper tank, to rinse the hair after normal shampoo making it softer and shinier, or even for humidifying the heaters, thus avoiding dangerous formations. of limestone.

How to proceed to clean the condenser

The dryer condenser is a pivotal element in the drying process. Placed in the lower part of the appliance, it produces hot air and promotes heat exchange. Unlike the filters and the water tank, the piece is an integral part of the heat pump therefore practically can not be removed. Welded to the circuit, its cleaning is not part of the routine maintenance operations.

Part of the cleaning can be carried out directly by the user, while a second part must necessarily be carried out by highly competent and qualified technicians. In most models, the lamellar condenser is preceded by the second completely removable filter. It is not always possible to extract the condenser, so to reach it you have to proceed with a vacuum cleaner extension.

Instructions

During this phase, it is important not to touch the blades with your hands because they are very sharp. The extraordinary maintenance operation must be carried out completely in safety, therefore it is necessary to proceed with the electric current disconnected. The innermost part, over the years, can also accumulate dirt and fluff, so for this procedure, it is good to rely on the competence and professionalism of specialized technicians.

The cleaning of some modern condensers provides for the removal of the piece. To eliminate impurities, simply wash them under cold running water and wait for complete drying before reassembly. Some appliances are equipped with a convenient self-cleaning system condenser that uses condensation water extracted from the clothing every 10-12 washes to clean the element and remove any fluff and lint.

Typically, cleaning should be done annually to improve the performance of the dryer and ensure a long life. However, it is often forgotten, underestimated, or performed too superficially. If maintenance is not carried out correctly and regularly, over time, there will be a reduction in the performance of the appliance.

See these sites 23premiumgames and 100celebrities.